Index of /firmware/attitude_adjustment/12.09-beta/rdaa-81/
[ RDAA-81 ]
Wistron RDAA-81 (CA8-PRO) device with zLoader (Atheros)
================== !!! IMPORTANT NOTICE !!! ==================
This firmware image is compatible with factory bootloader only
==============================================================
Product specification:
Vendor: Wistron NeWeb Corporation
CPU: Atheros AR2313A @ 180MHz (mips)
Memory: 32 MiB
Flash size: 4 MiB
Bootloader: zImage
Ethernet ports: 3 x 10/100 (PHY: Marvell 88E6060-RCJ1)
Wireless: Atheros AR5112 (802.11a/b/g)
MiniPCI slots: N/A
Input voltage: 5V DC, Mini Barrel Jack (special)
UART settings: 115200 baud, 8-N-1 mode (TTL-compatible logic levels)
==========================================
Attitude Adjustment 12.09-beta* port fixes
==========================================
LAN Router - Version 2.0 BETA (r33312) - 2012-11-06
---------------------------------------------------
[INF] There is no JFFS2 release from this image, because the flash size is too small for that.
[INF] Support pacthes migrated form backfire: device and LED configuration (zConfig), WAN port fix (zSwitch).
[INF] Migrated utilities: CDP (Cisco Discovery Protocol) daemon, boardinfo.
[MOD] Respository of own projects added to opkg.conf.
[MOD] WLAN LED pre-configuration removed from uci-defaults; Reason: defined by default config.
[FIX] New zLoader partition parser implemented for 3.x kernel support (zLoader).
[REM] Removed package: 'swconfig'; Reason: it's not used for Marvell switch.
[ FIRMWARE SUMMARY ]
Firmware version: LAN Router, v2.0 (BETA)
Kernel version: 3.3.8
Image format: zImage (LZMA)
Rootfs Type: SquashFS
Build server: midori.home.dtech.hu
Build host: Debian GNU/Linux, Version 6.0.5
Latest build: 2012-11-06
Status: PRODUCTION TEST RESULT: OK