Index of /firmware/chaos_calmer/15.05/RB-SXT-5HnD/
[ RB-SXT-5HnD ]
MikroTik RouterBOARD SXT 5HnD - in USB-NAS configuration (Ar71xx)
================== !!! IMPORTANT NOTICE !!! ==================
This firmware image is compatible with factory bootloader only
==============================================================
Product specification:
Vendor: MikroTikls Ltd.
CPU/SoC: Atheros AR7242 @ 400MHz (MIPS32 24Kc)
Memory: 32 MiB (DDR1)
Flash size: 64 MiB (Parallel NAND): 256 kiB booter, 3.75 MiB for kernel and 60 MiB for rootfs
Bootloader: MikroTik RouterBOOT (Boot console is disabled by the vendor!)
Ethernet ports: 1 x 100 Mbps (PHY: AR7242/GMAC1-PHY0, S26-internal)
Wireless: Onboard: Atheros AR9280 (802.11a/n, 300Mpbs), Antenna: 2x2 MIMO (inside PCB, 5 GHz only)
MiniPCI slots: None
USB ports: 1 x USB 2.0 (inside)
Input voltage: 9-30V DC via passive PoE, Type: RJ45 (Polarity: Blue pair -> positive, Brown pair -> GND)
RTC battery: None
UART settings: 115200 baud, 8-N-1 mode (TTL compatible logic levels)
UART pinout: Vcc (3.3V): 1, GND: 2, RX: 3, TX: 4.
====================================
Chaos Calmer 15.05 kernel port fixes
====================================
This firmware contains a 3rdParty Atheros AR7240 Ethernet driver from DD-WRT:
https://files.llorephie.org/openwrt/DIR-632A1/15.05/11oct2015/openwrt-dir632a1.patch
Files:
- openwrt-ar71xx-mikrotik-sxt-5hnd-vmlinux-initramfs.elf ELF ramdisk image, for prepare install or testing only,
- openwrt-ar71xx-mikrotik-sxt-5hnd-vmlinux-original.elf ELF kernel image - original (target: /dev/mtdblock1, file name: kernel),
- openwrt-ar71xx-mikrotik-sxt-5hnd-original-bootlog.txt device bootlog - original (dmesg),
- openwrt-ar71xx-mikrotik-sxt-5hnd-vmlinux-buzzerled+ethfix.elf ELF kernel image - with buzzerled and ethfix (target: /dev/mtdblock1, file name: kernel),
- openwrt-ar71xx-mikrotik-sxt-5hnd-buzzerled+ethfix-bootlog.txt device bootlog - with buzzerled and ethfix (dmesg),
- openwrt-ar71xx-mikrotik-sxt-5hnd-Ath9k-rootfs-buildfix.tar.gz root filesystem compressed image (target: /dev/mtdblock2, erase partition and extract).
Atheros Ar71xx (r46767) - RootFS: openwrt-ar71xx-mikrotik-sxt-5hnd-Ath9k-rootfs-buildfix.tar.gz - 2017-11-05
------------------------------------------------------------------------------------------------------------
[FIX] OPKG source lists and signature keys are fixed (base packages source replaced),
[FIX] LuCI package replaced: git-15.340.41458 -> git-15.248.30277 (original repo build),
[FIX] All valid repository signatures are fixed,
[MOD] LED default triggers are set (User LED: eth1, Ath9k LED: wlan0),
[NEW] New package added: block-mount.
Atheros Ar71xx (r46767) - Kernel: openwrt-ar71xx-mikrotik-sxt-5hnd-vmlinux-buzzerled+ethfix.elf - 2017-01-07
------------------------------------------------------------------------------------------------------------
[NEW] Internal buzzer LED pin support added (groove:buzzer),
[FIX] Improve eth1 (S26) link stabilty.
Atheros Ar71xx (r46767) - Kernel: openwrt-ar71xx-mikrotik-sxt-5hnd-vmlinux-original.elf - 2016-01-02 (RENAMED)
- RootFS: openwrt-ar71xx-mikrotik-sxt-5hnd-Ath9k-rootfs-original.tar.gz (RENAMED)
--------------------------------------------------------------------------------------------------------------
[NEW] Some packages added: USB-storage support, Ext2/3/4 support, vsftpd, Samba, p910nd, hd-idle, MiniDLNA, Transmission.
[FIX] Disabled warning trace after setting up eth1 interface (S26),
[MOD] Auto-configured eth1 to LAN Bridge,
[NEW] LED support: user-led, ath9k-phy,
[FIX] Disabled unused eth0 port (by empty MAC address),
[NEW] AR7240 driver support (necessary for internal S26 PHY device),
[FIX] Fixed board MAC address detection,
[MOD] RB750 series fixes for RouterBOOT partitions and ath9k-based WLAN,
[FIX] Custom kernel parameters configured,
[NEW] Added support for device 'groove' (SXT-5HnD).
[ FIRMWARE SUMMARY ]
Kernel version: 3.18.20
Image format: ELF kernel image + Initramfs image
Rootfs Type: YAFFS2
Build server: itsuki.dev.dtech.hu
Build host: Debian GNU/Linux, Version 7.0
Latest build: 2017-01-07
Status: PRODUCTION TEST RESULT: OK