Index of /firmware/chaos_calmer/15.05/35HD-NAS-E/
[ 35HD-NAS-E ]
MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini)
================== !!! IMPORTANT NOTICE !!! ==================
This firmware image is compatible with factory bootloader only
==============================================================
Product specification:
Vendor: MRT Communication Ltd.
CPU/SoC: Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM)
Memory: 64 MiB (DDR1 SDRAM)
Flash size: 16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config)
Bootloader: Storlink Boot Loader (zImage)
Ethernet ports: 1 x 1000 Mbps (PHY: Marvell 88E1111)
Wireless: None
MiniPCI slots: None
USB ports: 1 x USB 2.0 (back side)
Input voltage: 12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring)
RTC battery: CR2032 / 3V lithium battery
UART settings: 19200 baud, 8-N-1 mode (TTL compatible logic levels)
UART pinout: JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5.
Device alias: Multicase HD-35SN
====================================
Chaos Calmer 15.05 kernel port fixes
====================================
This kernel works with the official compiled repository.
Files:
- openwrt-gemini-mrt-35hd-patafix-original-zImage LZMA kernel image (original, 2015-10-10),
- openwrt-gemini-mrt-35hd-patafix+jp3-led-zImage LZMA kernel image with JP3 LED pin support (2016-07-30),
- openwrt-gemini-mrt-35hd-patafix+jp3-led-bootlog.txt device bootlog (dmesg),
- openwrt-gemini-mrt-35hd-squashfs.img squashfs filesystem image (ramdisk),
- openwrt-gemini-mrt-35hd-packages.txt packages list (opkg list-installed),
- openwrt-gemini-mrt-35hd-patafix+jp3-led-sysupgrade.tar.gz sysupgrade image,
- openwrt-gemini-mrt-35hd.md5 checksum image file (md5).
Gemini IB42x0 (r46767) - RootFS: openwrt-gemini-mrt-35hd-squashfs.img - 2017-11-21
----------------------------------------------------------------------------------
[FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed).
[NEW] Necessary kernel modules and packages added.
Gemini IB42x0 (r46767) - Kernel: openwrt-gemini-mrt-35hd-patafix+jp3-led-zImage - 2016-07-30
--------------------------------------------------------------------------------------------
[NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk)
Gemini IB42x0 (r46767) - Kernel: openwrt-gemini-mrt-35hd-patafix-original-zImage - 2015-10-10 (RENAMED)
-------------------------------------------------------------------------------------------------------
[FIX] Memory size modified to 64MB.
[MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191).
[FIX] ATA Channel #1 disabled.
[ FIRMWARE SUMMARY ]
Kernel version: 3.18.20
Image format: zImage (LZMA)
Rootfs Type: SquashFS
Build server: itsuki.dev.dtech.hu
Build host: Debian GNU/Linux, Version 7.0
Latest build: 2016-07-30
Status: PRODUCTION TEST RESULT: OK
