Index of /firmware/chaos_calmer/15.05.1/35HD-NAS-E/

[ 35HD-NAS-E ]
MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini)

================== !!! IMPORTANT NOTICE !!! ==================
This firmware image is compatible with factory bootloader only
==============================================================

Product specification:
Vendor:		MRT Communication Ltd.
CPU/SoC:	Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM)
Memory:		64 MiB (DDR1 SDRAM)
Flash size:	16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config)
Bootloader:	Storlink Boot Loader (zImage)
Ethernet ports:	1 x 1000 Mbps (PHY: Marvell 88E1111)
Wireless:	None
MiniPCI slots:	None
USB ports:	1 x USB 2.0 (back side)
Input voltage:	12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring)
RTC battery:	CR2032 / 3V lithium battery
UART settings:	19200 baud, 8-N-1 mode (TTL compatible logic levels)
UART pinout:	JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5.

Device alias:	Multicase HD-35SN

==============================================================
NOTICE: This image works with the official package repository.
==============================================================

Files:
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-zImage.img		LZMA kernel (parition: Kern),
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-bootlog.txt		device bootlog (dmesg),
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-squashfs.img		squashfs filesystem (parition: Ramdisk),
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-sysupgrade.tar.gz	sysupgrade image,
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-packages.txt		packages list (opkg list-installed),
- openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e.md5			MD5 checksum.

=========
CHANGELOG
=========

Chaos Calmer 15.05.1 (r48532) - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e* - 2018-03-14
-------------------------------------------------------------------------------------------
[UPD] Updated to Openwrt Chaos Calmer v15.05.1 (r48532),
[NEW] Darkmatter theme for LuCI added.

Chaos Calmer 15.05 (r46767) - openwrt-gemini-mrt-35hd-patafix+jp3-led* - 2016-07-30
-----------------------------------------------------------------------------------
[FIX] Memory size modified to 64MB,
[MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191),
[NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk),
[FIX] Default trigger changed for JP3 pin: idedisk (kernel based),
[FIX] ATA Channel #1 disabled,
[NEW] Kernel modules compiled into the kernel: leds-gpio, ledtrig-ide-disk.
[FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed),
[NEW] Necessary kernel modules and packages added to rootfs image.

[ FIRMWARE SUMMARY ]

Kernel version:		3.18.23
Image format:		zImage (LZMA)
Rootfs Type:		SquashFS
Build server:		itsuki.dev.dtech.hu
Build host:		Debian GNU/Linux, Version 7.0
Latest build:		2018-03-14
Status:			PRODUCTION TEST RESULT: OK