Index of /firmware/backfire/10.03.1/rdaa-81/
[ RDAA-81 ]
Wistron RDAA-81 (CA8-PRO) device with zLoader (Atheros)
================== !!! IMPORTANT NOTICE !!! ==================
This firmware image is compatible with factory bootloader only
==============================================================
Product specification:
Vendor: Wistron NeWeb Corporation
CPU: Atheros AR2313A @ 180MHz (mips)
Memory: 32 MiB
Flash size: 4 MiB
Bootloader: zImage
Ethernet ports: 3 x 10/100 (PHY: Marvell 88E6060-RCJ1)
Wireless: Atheros AR5112 (802.11a/b/g)
MiniPCI slots: N/A
Input voltage: 5V DC, Mini Barrel Jack (special)
UART settings: 115200 baud, 8-N-1 mode (TTL-compatible logic levels)
============================================
Backfire 10.03.1, r29638 (stable) port fixes
============================================
LAN Router - Version 1.1 - 2012-10-18
-------------------------------------
[FIX] Updated support pacthes: partitions (zLoader), device configuration (zConfig), WAN port fix (zSwitch).
[FIX] Reset button GPIO registration fixed, it solves reset issue. (Now it works at cold start.)
[MOD] 'zloader' mtdpoint removed, 'loader' offset and size fixed to 320kB and changed to writable. (DANGEROUS!!!)
[MOD] 'ca8_binfo' init.d script renamed to 'boardinfo'.
[REM] Removed package: 'swconfig'; Reason: it's not used for Marvell switch.
[NEW] LED support added for wlan LEDs (GPIO #4 -> wlan_yellow, GPIO #5 -> wlan_blue).
[NEW] Respository of own projects added to opkg.conf.
LAN Router - Version 1.0 - 2012-06-29
-------------------------------------
[INF] There is no JFFS2 release from this image, because the flash size is too small for that.
[FIX] Fixed CA8 support patches for kernel: partitions (CA8_PRv2), interfaces (CA8_CRv2).
[FIX] Fixed Reset Button pin to GPIO #6. (It doesn't work perfectly at cold start.)
[NEW] Added new 'zloader' writable mtdpoint to physflash for easy bootloader upgrade. (DANGEROUS!!!)
[NEW] CDP (Cisco Discovery Protocol) daemon and init.d script added to image.
[NEW] The 1st and 2nd Ethernet ports are assigned to LAN (eth0.1), but the 3rd port is hardcoded to WAN (eth0.2).
[ FIRMWARE SUMMARY ]
Firmware version: LAN Router, v1.1 (stable)
Kernel version: 2.6.30.10
Image format: zImage (LZMA)
Rootfs Type: SquashFS
Build server: itsuki.dev.dtech.hu
Build host: Debian GNU/Linux, Version 6.0.5
Latest build: 2012-10-18
Status: PRODUCTION TEST RESULT: OK